MG50 50BMG SuppressorProduct Details
The 50BMG is not for the timid... It sends enough powder and bullet down range to make quite a ruckus. Suppressing 250+ grains of gritty-supersonic-blowtorch is not easy. The MG50 tames the beast.
*** When switching from a 50BMG muzzle brake to the MG50 suppressor, shooters may experience slightly heavier recoil. The end user assumes all liability for use of this device. KNOW YOUR ABILITIES! ***
Precision CNC machined from 100% 17-4PH stainless steel, laser welded and then hardened to the max. The final result is a suppressor with a hardness of 45-47Rc and tensile strength of 190,000psi.
Muzzle brake ring option:
This option replaces the last baffle with a 360 muzzle brake segment. This helps reduce recoil with the excess gasses exiting the can. While those gasses are very slow compared to a bare-muzzle muzzle brake, the volume of gas does work to reduce recoil of the whole system. This is meant for the 50BMG hosts as it has enough gas to effective drive the brake. Smaller caliber and load hosts will not effectively drive the brake and are therefore not necessary. If you are not the using the suppressor on a 50BMG or a similarly large powder capacity host, the muzzle brake ring is not worth it.
Host: Steyr HS50 33" barrel
Ammo: PMC Bronze, 660gr FMJ, 3050fps muzzle velocity
Shooter's right ear SPL: 134.3dB
Key Features and Specs:
- Tubeless & Fully Laser Welded
- 2.00-20 UN Main Thread for variety of mounting options
- Includes a direct thread mount in your choice of muzzle thread:
- 3/4-24
- 7/8-14
- 7/8-24
- 1-14
- M28x1.5
- M25x1.5
- M24x1
- 1.125-12
- 1.125-12L (M2, M2HB OOW)
- 1.250-12 (NOREEN)
- 100% 17-4PH Stainless Steel Hardened to 45-47Rc at 190,000psi Tensile
- 14.5" Overall length (10 baffles)
- 4.0 LBS (including direct thread mount)
- 2.45" Diameter
- Unique RAW Bronze Heat Treated Finish
- 20" Minimum Barrel Length
- Easy to Recore
- Lifetime, No BS Warranty
ALL NFA RULES APPLY.
To place an order, you must live in the USA in a state that allows ownership of silencers and you must be legally allowed to possess firearms. This item is restricted and can only ship to Class 3 FFL dealers. To best speed your order processing, please have your Class 3 FFL email us their FFL and current SOT before or soon after you order .
THIS ITEM DOES NOT SHIP DIRECTLY TO YOU. THIS ITEM CANNOT BE EXPORTED.
THIS ITEM MUST TRANSFER TO YOU ON A BATFE FORM 4
*Free Shipping does not apply to NFA items
The 50BMG is not for the timid... It sends enough powder and bullet down range to make quite a ruckus. Suppressing 250+ grains of gritty-supersonic-blowtorch is not easy. The MG50 tames the beast.
*** When switching from a 50BMG muzzle brake to the MG50 suppressor, shooters may experience slightly heavier recoil. The end user assumes all liability for use of this device. KNOW YOUR ABILITIES! ***
Precision CNC machined from 100% 17-4PH stainless steel, laser welded and then hardened to the max. The final result is a suppressor with a hardness of 45-47Rc and tensile strength of 190,000psi.
Muzzle brake ring option:
This option replaces the last baffle with a 360 muzzle brake segment. This helps reduce recoil with the excess gasses exiting the can. While those gasses are very slow compared to a bare-muzzle muzzle brake, the volume of gas does work to reduce recoil of the whole system. This is meant for the 50BMG hosts as it has enough gas to effective drive the brake. Smaller caliber and load hosts will not effectively drive the brake and are therefore not necessary. If you are not the using the suppressor on a 50BMG or a similarly large powder capacity host, the muzzle brake ring is not worth it.
Host: Steyr HS50 33" barrel
Ammo: PMC Bronze, 660gr FMJ, 3050fps muzzle velocity
Shooter's right ear SPL: 134.3dB
Key Features and Specs:
- Tubeless & Fully Laser Welded
- 2.00-20 UN Main Thread for variety of mounting options
- Includes a direct thread mount in your choice of muzzle thread:
- 3/4-24
- 7/8-14
- 7/8-24
- 1-14
- M28x1.5
- M25x1.5
- M24x1
- 1.125-12
- 1.125-12L (M2, M2HB OOW)
- 1.250-12 (NOREEN)
- 100% 17-4PH Stainless Steel Hardened to 45-47Rc at 190,000psi Tensile
- 14.5" Overall length (10 baffles)
- 4.0 LBS (including direct thread mount)
- 2.45" Diameter
- Unique RAW Bronze Heat Treated Finish
- 20" Minimum Barrel Length
- Easy to Recore
- Lifetime, No BS Warranty
ALL NFA RULES APPLY.
To place an order, you must live in the USA in a state that allows ownership of silencers and you must be legally allowed to possess firearms. This item is restricted and can only ship to Class 3 FFL dealers. To best speed your order processing, please have your Class 3 FFL email us their FFL and current SOT before or soon after you order .
THIS ITEM DOES NOT SHIP DIRECTLY TO YOU. THIS ITEM CANNOT BE EXPORTED.
THIS ITEM MUST TRANSFER TO YOU ON A BATFE FORM 4
*Free Shipping does not apply to NFA items
****Free Shipping does not apply to NFA items****